digital life chronicle

カメラ/Mac/iPhone/デジタル家電

digitalな小物や身の回りの出来事等をつれづれと綴ってゆきたいと思います。 AppleやSony製品が好きな様です。 オフ会等にも積極的に参加してゆきたいと思っている今日この頃。 よろしくお願いします。 そこ違うよとかのご指摘も大歓迎です。

freenas

正式版ダウンロードページの裏でFreeNAS8.0.3のRC版がリリースされるらしい

freenasbanner240

前のエントリーでご紹介していたFreeNAS

現在もトップページを見ると8.0.2のダウンロードリンクがあり、そこから32Bit版と64Bit版の2種類を入手可能です。

その裏では、継続して開発が進んでおり、そろそろFreeNASの次のバージョンである8.0.3が準備されている様です。

こちらがダウンロードページとなります。


現在RC1(製品候補 1版)となっており

FreeNAS

Release Notes for FreeNAS 8.0.3-RELEASE

*** IMPORTANT ***

- The image size increased in 8.0.1-BETA3. The new size requires a 2 GB
storage device. The GUI upgrade can be used to upgrade a system from
BETA3, BETA4, or RC1 but upgrades from earlier releases can only be
done from the CD. The other option is to save the config, reinstall
the new version, then restore the config.
- FreeBSD can be really touchy with hardware. Please be sure to update
your BIOS/BMC firmware when upgrading / installing FreeNAS if you run
into OS hang issues. There have been cases identified where a BIOS
upgrade has fixed driver hangs, and/or other issues with FreeNAS; one
such example was with an Intel 82578DC motherboard, as noted in the
FreeNAS 8 forum thread titled "8.0.3-RELEASE coming soon..":
http://bit.ly/rq78Q3 , post # 70-88. Again, please only do this if you
experience booting / runtime issues, as some vendors don't test
FreeBSD interoperability as much as others between major firmware
releases.
- Previous builds were branded as i386/amd64 (32-bit and 64-bit
respectively). 8.0.3-RC1+ rebranded the architectures as x86 and x64,
respectively.





さて機能拡張は次の様になっている様です。
Changes since 8.0.2-RELEASE:

Enhancements
------------------------

Reduce FreeNAS footprint
========================

1. Use smaller block and frag sizes for /etc and /var .
2. Import a build tweak to nuke /var/db/pkg to save ~7MB space.
3. Other build tweaks to remove non-essential features and packages from
the image.

Middleware
========================

1. Hide Etc/GMT* timezones as they're behavior is counterintuitive and
conflicts with Windows 7 semantics (see r8707).
2. Add tunable / sysctl support so settings that affect kernel behavior
persist across upgrades.

AD/CIFS
========================

1. Bump samba from 3.5.11 to 3.6.1.
2. Address simple failure cases with getting Kerberos tickets (clock
skew) and joining AD domains (invalid passwords, bad short domain names,
etc) so that users could better rectify improperly configured NAS boxes;
this means that if either of these cases fail, the GUI will now inform
the user that the 'Active Directory' service is stopped.
3. Fix cachetool to better prevent potential race condition at boot between
winbindd and ix-cache.

AFP
========================

1. Bump netatalk to 2.2.1.
2. Add knob for controlling the maximum number of configurable connections
(see ticket: 847).
3. Only advertise services via avahi if they're enabled (see ticket: 852).

Rsync
========================

- NFSv4 ACL support (see: r8375, r8414).

Misc
========================

1. Upgrade ataidle to 2.6.
2. Upgrade nut / net-snmp to 2.6.2 and 5.7.1, respectively.
3. Import omnibus build system fixes to fix the fact that the 8.0.3-BETA1
image was broken due to the environment of the build machine where it
was produced on. This also fixes other items, such as DDNS because of
build environment tainting.
4. Increase the /var md size from 74MB to 160MB s.t. samba will be able
to service requests copying large sets of files, and the rest of the
system will be able to play nicely with samba to a certain degree.
More tuning is required for larger samba userbases.
続きを読む
     
  •         このエントリーをはてなブックマークに追加  

またまた出遅れてましたFreeNAS8.0.2正式版リリースされてました。

freenasbanner240

NAS構築があっという間にできるソフトウェア群のFreeNAS
マイナーなBugFixとなるFreeNASのバージョンアップが有った様です。


Release Notes for FreeNAS 8.0.2-RELEASE

*** IMPORTANT ***

The image size increased in 8.0.1-BETA3. The new size requires a 2 GB
storage device. The GUI upgrade can be used to upgrade a system from BETA3,
BETA4, or RC1 but upgrades from earlier releases can only be done from the CD.
The other option is to save the config, reinstall the new version, then
restore the config.

Major changes since 8.0.1-RELEASE:

- The email subsystem was not working correctly in 8.0.1-RELEASE, which
resulted in the system not being able to send mail, as well as disfunction
of the alerting system in the GUI.

Changes since 8.0.1-RELEASE:

- Allow decimal numbers for a dataset quota. (r8728)

- Fix setting recursive ACLs. (r8270)

- Start proftpd after ix-ssl to use the correct SSL cert. (r8246)

- Use wildcards in cron and rsync jobs instead of listing all values. (r8214, r8211)

- Fix case in iSCSI targets to match the behavior specified by RFC 3722. (r8120)

Changes since 8.0-RELEASE

There's too much to list here, but the high points are:

- Divorced the volume members in the database from the FreeBSD devices.
This resolves an issue where FreeBSD can change devices names and the
GUI doesn't pick up the updates due to the devices names being hard-wired
in the database.

- Support exporting ZFS zvols (virtual devices) as device extents via iSCSI.
8.0 was only able to export physical device nodes or file based extents.

- The GUI now has an event notification system.

- The email backend has been refactored.

- Many many changes in the GUI to help it validate and sanitize inputs that
are passed to the backend daemons.

- Added UPS functionality.

- Added rsync client and server functionality.

- Added the ability to schedule cron jobs in the GUI.

- Vastly improved and reworked snapshot replication.

Errata:

CHAP doesn't work with GlobalSAN initiators on OS X.

Upgrades from FreeNAS 0.7 aren't supported.

The installer doesn't check the size of the install media before attempting
an install. A 2 GB device is required, but the install will appear to
complete successfully on smaller devices, only to fail at boot.

The installer will let you switch from i386 to amd64 architecture and
vice-versa, but some files, such as the rrd files used by the statistics
graphing package are architecture dependent.

Filename:
FreeNAS-8.0.2-RELEASE-amd64-Full_Install.xz
SHA256 Hash:
4363351d478c3ea5134bc1c9f8258e34f228059cbf98c57d21e04663d1694689

Filename:
FreeNAS-8.0.2-RELEASE-amd64-GUI_Upgrade.xz
SHA256 Hash:
5c0562f8fedcda7d91e23d0ae759135d68d6e32c2e1fb2a75cccc682ea0d5588

Filename:
FreeNAS-8.0.2-RELEASE-amd64.iso
SHA256 Hash:
8980fc423bb8f3596cd2de76944527efd2325d1849e8656bea6be9b20c5369b8

Filename:
FreeNAS-8.0.2-RELEASE-i386-Full_Install.xz
SHA256 Hash:
70b1147781da43f2e1f9025636334d003d81d0d08c975d4166a5e90ed1a90c32

Filename:
FreeNAS-8.0.2-RELEASE-i386-GUI_Upgrade.xz
SHA256 Hash:
5db7d54df355eba6c14da72c107ecb0172557d80ef88bcf5675a5fff60008f8f

Filename:
FreeNAS-8.0.2-RELEASE-i386.iso
SHA256 Hash:
3c75c1797ad796cf249290dfd774bfdf50483455834ea4b41e9c3a26e269319d


BugFixですので、利用されている方は適用してはいかがでしょうか。
     
  •         このエントリーをはてなブックマークに追加  

気がつけばFreeNAS8.0.1正式版がリリースされていました

前の記事でお伝えしたFreeNASですが、なんと日本時間で10月1日には正式版がリリースされていた様です。

16)


以前のバージョンからのアップデート用のパッケージも用意されている様です。

RC版をお使いの方は、アップデートしてはいかがでしょうか。

     
  •         このエントリーをはてなブックマークに追加  

FreeNAS8.0.1がRC2にビルドアップしたので仮想環境にインストールしてみた

前にご紹介いたしましたFreeNAS8.0.1がリリース候補第2版へビルドアップの記事

これを受けて、自分でもWindows7マシンに仮想環境( VMWare Server (無償版) )を準備してインストールしてみました。

セットアップは非常に簡単な操作だけで、あっという間にNAS(ネットワーク接続ストレージ)を作成する事が出来ました。

実際にNASとしての設定等を行うのはブラウザ画面から行います。
47)

このような画面のWeb画面でコントロールする事になります。

今回は、Windows7マシン上で記録も取らずインストールしましたが、余りのインストールの簡単さにびっくりする程でした。

次回、正式リリース版が出た時にでもインストール方法を記事にしてみたいと思います。
     
  •         このエントリーをはてなブックマークに追加  

FreeNAS8.0.1が、RC1からRC2へビルドアップデート

現地時間で09月19日FreeNAS8.0.1が、RC1(リリース候補版1)からRC2(リリース候補版2)へビルドアップデートしています。

順調に開発が進んでいるようですね。

安定化版まで、もう少しと言ったところでしょうか。
完成するのが楽しみですね。
     
  •         このエントリーをはてなブックマークに追加  
プロフィール

Hilolin

お気に入りブログ
QRコード
QRコード
記事検索
  • ライブドアブログ